Home » Forum » Open mic at the Blue Iguana »
Mic vs direct input

mic vs direct input

goldtop68 posted on 22 août 2015 #1
goldtop68
Membre
Posts: 50
Joined: 5 août 2015
Hi All,
just wondering if there is a preference on this site to mic and amp, or plug in directly to your interface. I guess I mean bass and guitars mostly.
All the previous recordings I have done for myself, and youtube stuff were just straight in. So far on this site I used a microphone on my amp (which I think sounds better)
Any opinions on this?
cheers
jeff
DannyK posted on 22 août 2015 #2
DannyK
Membre
Posts: 213
Joined: 7 mars 2014
I plug my electric instruments directly into the interface. You have to have one hell of a good ear to be able to discern a digital recording direct from a mic'ed one. Live, a mic'ed amp sounds better to me but recorded? Modeling is so good that not even the pros can tell a difference anymore. I recently read a story where some of the top recording engineers in the business were asked to listen to some tracks and say which were digitally modeled amps and which ones were mixed. They all failed.

So, for the money (mics!), convenience (loudness), and quality (getting better all the time) I can't justify mic'ing an amp ... especially in my little home.
Fender AV II 63 TELE RW RED TRANS
Fender AV II 63 TELE RW RED TRANS
Electric Guitar
2.249 €
iThis widget links to Thomann, our affiliate partner. We may receive a commission when you purchase a product there. Visit Shop
nilton posted on 22 août 2015 #3
nilton
Membre
Posts: 374
Joined: 25 mars 2012
It all depends on the modeler I use a AxeFx2 wich indistinguishable (or even better in some cases) from real high end amps. And you get rid of the hassle of getting a high end mic and placing it correctly. Other modelers do not reach this standard but a Kemper comes close.

But as dannyk says micing takes good mikes, demands your amp to be cranked up and takes careful mic placement and when using a low to mid budget amp you might be better of with a modeller and get less noise. Or maybe a good amp with built in modeller which has a recording output.

Another option is sending your amp output through a DI with speaker simulation and maybe dummy load. There are a number of models. I have a Behringer Ultra-G which sounds surprisingly decent but adds a lot och noise (The guys at that company don't seem to be able to get anything right)

Yet another way is using a tube based stompbox/preamp/di: Not as versatile as a good modeller but tends to give good sound and is very conveniant
Rickplayer posted on 22 août 2015 #4
Rickplayer
Membre
Posts: 990
Joined: 16 oct. 2011
I use Guitar rig with a interface it gives me the option to use a variety of amps within the program. I have mic'ed my bass and that also sounds great. So I guess it is a matter of preference. What ever you like and sounds good to you is what wikiloops is all about. I have done some live recordings to get a different sound so it depends on the song and what you want to put together.
goldtop68 posted on 23 août 2015 #5
goldtop68
Membre
Posts: 50
Joined: 5 août 2015
I guess that all would make sense,if my recording setup were not so lame.
frenzie posted on 4 sept. 2015 #6
frenzie
SUPPORTER
Posts: 78
Joined: 3 sept. 2015
its both good these days
I never liked direct in, but with guitar rig it
can sound great so can the old 57 in front of the speaker
but you have to have a bit volume when using an amp
so when recording late at night or sunday morning use
direct in :-)
i tend to lean towards the mike/amp for a bit more dynamics
but you do get a great amound of sounds from guitar rig

:)
wikiloops online jamsessions are brought to you with friendly support by:
user profile image
Wikiloops is a great idea, well executed and deserves support - come on guys, support it - you don't expect to get anything good for nothing!
flythorn

wikiloops.com utilise des Cookies pour vous apporter la meilleure expérience de navigation.
En apprendre plus sur notre charte des données privées.